| PART |
Description |
Maker |
| CY7C68000-48BAC |
Telecomm/Datacomm 电信/数据通信
|
Cypress Semiconductor Corp.
|
| OD-J6863-0A01 OD-J6863-HA01 |
Telecomm/Datacomm 电信/数据通信
|
3M Company
Electronic Theatre Controls, Inc.
|
| KS8993 KS8993M |
Telecomm/Datacomm, Other - Datasheet Reference
3 Port 10/100 Integrated Managed Switch
|
Micrel Semiconductor
|
| AMBE2000 |
Telecomm/Datacomm, Other - Datasheet Reference
From old datasheet system
|
Digital Voice Systems Inc
|
| U3600BM-NFNG3 U3600BM-NFN |
Telecomm/Datacomm, Other - Datasheet Reference
From old datasheet system
|
Atmel Corp
|
| TA8552AFN02 |
PLL Data Synchronizer For DAT Streamer
|
Toshiba Semiconductor
|
| ON2175 |
Reflective photosensor Tape end sensor for DAT
|
Panasonic Corporation
|
| DAT40 DAT80 |
(DAT Series) High Voltage / Power Capacitors
|
Murata Electronics
|
| ON2175 CNB1304H |
From old datasheet system
Reflective photosensor Tape end sensor for DAT
|
PANASONIC[Panasonic Semiconductor]
|
| 766101 766104 766106 766163 766 766168 766001 7660 |
Pulse Transformers
KUS Kit Series; Functions: Continuous light; Rated Voltage: 120V AC; Style: Power Unit; Diameter: 70mm square; Applicable Model: KUS
TX/RX IC 15 BIT TS ADR 1 MOM DAT
Pulse Transformers 脉冲变压
|
http://
List of Unclassifed Manufacturers
CANDD[C&D Technologies]
ETC
|
| 25AA160 25C160 25LC160 25LC160T-ISN 25C160T-ISN 25 |
Power Source Selector for Dual-Battery Systems
Voltage-Positioning Evaluation Kit for the MAX1711
Evaluation Kit for the MAX1773
Evaluation Kit for the MAX1844
The 25LC160 is a 16K bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and dat
The 25C160 is a 16K bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data
The 25AA160 is a 16K-bit Serial Electrically Erasable PROM with memory accessed via a simple Serial Peripheral Interface (SPI™) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and dat
|
Microchip
|
